珊瑚虫IP库浅析

所属分类: 网络编程 / PHP编程 阅读数: 2075
收藏 0 赞 0 分享

这不是什么新鲜事情了,很早之前就已经有人做出来了。
就是使用PHP操作纯真IP库或珊瑚虫IP库,根据来访者的IP得到所在的物理位置。

我先帖出代码。然后再慢慢一步步浅析出来。希望对想了解这一块的朋友们有帮助。

Only For PHP5的代码。会继续优化代码的。

class IpLocation{
    private $fp;
    private $wrydat;
    private $wrydat_version;
    private $ipnumber;
    private $firstip;
    private $lastip;
    private $ip_range_begin;
    private $ip_range_end;
    private $country;
    private $area;
    const REDIRECT_MODE_0 = 0;
    const REDIRECT_MODE_1 = 1;
    const REDIRECT_MODE_2 = 2;
    function __construct(){
        $args = func_get_args();
        $this->wrydat = func_num_args()>0?$args[0]:'CoralWry.dat';
        $this->initialize();
    }
    function __destruct(){
        fclose($this->fp);
    }
    private function initialize(){
        if(file_exists($this->wrydat))
            $this->fp = fopen($this->wrydat,'rb');
        $this->getipnumber();
        $this->getwryversion();
    }
    public function get($str){
        return $this->$str;
    }
    public function set($str,$val){
        $this->$str = $val;
    }
    private function getbyte($length,$offset=null){
        if(!is_null($offset)){
            fseek($this->fp,$offset,SEEK_SET);
        }
        $b = fread($this->fp,$length);
        return $b;
    }
/**
* 把IP地址打包成二进制数据,以big endian(高位在前)格式打包
* 数据存储格式为 little endian(低位在前) 如:
* 00 28 C6 DA    218.198.40.0    little endian
* 3F 28 C6 DA    218.198.40.0    little endian
* 这样的数据无法作二分搜索查找的比较,所以必须先把获得的IP数据使用strrev转换为big endian
* @param $ip
* @return big endian格式的二进制数据
*/
    private function packip($ip){
        return pack( "N", intval( ip2long( $ip)));
    }

    private function getlong($length=4, $offset=null){
        $chr=null;
        for($c=0;$length%4!=0&&$c<(4-$length%4);$c++){
            $chr .= chr(0);
        }
        $var = unpack( "Vlong", $this->getbyte($length, $offset).$chr);
        return $var['long'];
    }

    private function getwryversion(){
        $length = preg_match("/coral/i",$this->wrydat)?26:30;
        $this->wrydat_version = $this->getbyte($length, $this->firstip-$length);
    }

    private function getipnumber(){
        $this->firstip = $this->getlong();
        $this->lastip = $this->getlong();
        $this->ipnumber = ($this->lastip-$this->firstip)/7+1;
    }

    private function getstring($data="",$offset=null){
        $char = $this->getbyte(1,$offset);
        while(ord($char) > 0){
            $data .= $char;
            $char = $this->getbyte(1);
        }
        return $data;
    }

    private function iplocaltion($ip){
        $ip = $this->packip($ip);
        $low = 0;
        $high = $this->ipnumber-1;
        $ipposition = $this->lastip;
        while($low <= $high){
            $t = floor(($low+$high)/2);
            if($ip < strrev($this->getbyte(4,$this->firstip+$t*7))){
                $high = $t - 1;
            } else {
                if($ip > strrev($this->getbyte(4,$this->getlong(3)))){
                    $low = $t + 1;
                }else{
                    $ipposition = $this->firstip+$t*7;
                    break;
                }
            }
        }
        return $ipposition;
    }
    private function getarea(){
        $b = $this->getbyte(1);
        switch(ord($b)){
            case self::REDIRECT_MODE_0 :
                return "未知";
                break;
            case self::REDIRECT_MODE_1:
            case self::REDIRECT_MODE_2:
                return $this->getstring("",$this->getlong(3));
                break;
            default:
                return $this->getstring($b);
                break;
        }
    }
    public function getiplocation($ip){
        $ippos = $this->iplocaltion($ip);
        $this->ip_range_begin = long2ip($this->getlong(4,$ippos));
        $this->ip_range_end = long2ip($this->getlong(4,$this->getlong(3)));
        $b = $this->getbyte(1);
        switch (ord($b)){
            case self::REDIRECT_MODE_1:
                $b = $this->getbyte(1,$this->getlong(3));
                if(ord($b) == REDIRECT_MODE_2){
                    $countryoffset = $this->getlong(3);
                    $this->area = $this->getarea();
                    $this->country = $this->getstring("",$countryoffset);
                }else{
                    $this->country = $this->getstring($b);
                    $this->area    = $this->getarea();
                }
                break;

            case self::REDIRECT_MODE_2:
                    $countryoffset = $this->getlong(3);
                    $this->area = $this->getarea();
                    $this->country = $this->getstring("",$countryoffset);
                break;

            default:
                $this->country = $this->getstring($b);
                $this->area    = $this->getarea();
                break;
        }
    }
}
/* */
echo microtime();
echo "\n";
$iploca = new IpLocation;
//$iploca = new IpLocation('QQWry.dat');
echo $iploca->get('wrydat_version');
echo "\n";
echo $iploca->get('ipnumber');
echo "\n";
$iploca->getiplocation('211.44.32.34');
/**/
echo $iploca->get('ip_range_begin');
echo "\n";
echo $iploca->get('ip_range_end');
echo "\n";
echo $iploca->get('country');
echo "\n";
echo $iploca->get('area');

echo "\n";
echo $iploca->get('lastip');
echo "\n";
echo microtime();
echo "\n";
unset($iploca);

参考资料:LumaQQ的 纯真IP数据库格式详解

CoralWry.dat文件结构上分为3个区域:

  • 文件头[固定8个字节]
  • 数据区[不固定长度,记录IP的地址信息]
  • 索引区[大小由文件头决定]

该文件数据的存储方式是:little endian。
在这里引用了谈谈Unicode编码里的关于little endian 与 big endian的区别

引用

big endian和little endian是CPU处理多字节数的不同方式。例如“汉”字的Unicode编码是6C49。那么写到文件里时,究竟是将6C写在前面,还是将49写在前面?如果将6C写在前面,就是big endian。还是将49写在前面,就是little endian。

  “endian”这个词出自《格列佛游记》。小人国的内战就源于吃鸡蛋时是究竟从大头(Big-Endian)敲开还是从小头(Little-Endian)敲开,由此曾发生过六次叛乱,其中一个皇帝送了命,另一个丢了王位。

  我们一般将endian翻译成“字节序”,将big endian和little endian称作“大尾”和“小尾”。

文件头:
红色框框里的就是文件头,前4个字节是索引区的开始地址,后4个字节是索引区的结束地址。

如下图所示:


点击放大

由于数据库是使用了little endian的字节库,所以我们需要把它倒过来。
把文件头的0-3的字节读取出来,再使用 unpack 函数把二进制数据转换为big endian格式的无符号整型。
处理后,索引区的开始地址位置是:00077450 ;索引区的结束地址位置是:000CE17C。
如果你手头上有UltraEdit的软件,可以打开CoralWry.dat文件,查找地址为:00077450 的位置,那就是IP地址索引区的开始。
如下图所示:


点击放大

红色框框住那就是索引区的开始位置。

更多精彩内容其他人还在看

TP5(thinkPHP5)框架基于ajax与后台数据交互操作简单示例

这篇文章主要介绍了TP5(thinkPHP5)框架基于ajax与后台数据交互操作,结合实例形式分析了thinkPHP5前端基于jQuery的ajax数据提交及后台数据接收、处理相关操作技巧,需要的朋友可以参考下
收藏 0 赞 0 分享

PHP利用Mysql锁解决高并发的方法

这篇文章主要介绍了PHP利用Mysql锁解决高并发的方法,小编觉得挺不错的,现在分享给大家,也给大家做个参考。一起跟随小编过来看看吧
收藏 0 赞 0 分享

php 后端实现JWT认证方法示例

这篇文章主要介绍了php 后端实现JWT认证方法示例,小编觉得挺不错的,现在分享给大家,也给大家做个参考。一起跟随小编过来看看吧
收藏 0 赞 0 分享

ThinkPHP框架实现定时执行任务的两种方法分析

这篇文章主要介绍了ThinkPHP框架实现定时执行任务的两种方法,结合实例形式分析了2种被动执行定时任务的相关操作技巧与注意事项,需要的朋友可以参考下
收藏 0 赞 0 分享

PHP命名空间与自动加载类详解

这篇文章主要介绍了PHP命名空间与自动加载类,结合实例形式详细分析了php自动加载类与命名空间原理、使用方法及相关操作注意事项,需要的朋友可以参考下
收藏 0 赞 0 分享

PHP时间处理类操作示例

这篇文章主要介绍了PHP时间处理类,结合实例形式分析了DateTime、DateTimeZone、DateInterval及DatePeriod等常用日期时间处理类简单操作技巧,需要的朋友可以参考下
收藏 0 赞 0 分享

利用PHP扩展Xhprof分析项目性能实践教程

XHProf是Facebook开发的性能调试工具,能帮助直观的统计显示PHP程序执行中各方法函数调用次数和消耗时间,以方便我们排查性能瓶颈并进行调优。下面这篇文章主要给大家介绍了关于利用PHP扩展Xhprof分析项目性能实践的相关资料,需要的朋友可以参考下
收藏 0 赞 0 分享

Django 标签筛选的实现代码(一对多、多对多)

这篇文章主要介绍了Django 标签筛选的实现代码(一对多、多对多),本文给大家介绍的非常详细,具有一定的参考借鉴价值,需要的朋友可以参考下
收藏 0 赞 0 分享

PHP使用pdo实现事务处理操作示例

这篇文章主要介绍了PHP使用pdo实现事务处理操作,结合实例形式较为详细的分析了php基于pdo实现事务处理的相关原理与操作技巧,需要的朋友可以参考下
收藏 0 赞 0 分享

thinkPHP框架实现类似java过滤器的简单方法示例

这篇文章主要介绍了thinkPHP框架实现类似java过滤器的简单方法,结合实例形式分析了thinkPHP基于继承实现的登录验证功能相关操作方法,需要的朋友可以参考下
收藏 0 赞 0 分享
查看更多