oracle 存储过程和触发器复制数据

一。存储过程的创建和使用

1.创建程序包，并在程序中创建存储过程

create or replace
PACKAGE NCS_ICP_TJ AS
/*lfx@ncs-cyber.com.cn*/
/* TODO 在此输入程序包声明 (类型, 异常错误, 方法等) */
/*根据备案主体ID拷贝通过表备案数据到备案临时表，拷贝5张*/
PROCEDURE ICP_PASS_TO_TEMP(
v_main_id IN icp_gn_temp_baxx_zt.ztid%TYPE,
v_lyd IN icp_gn_temp_baxx_zt.SJXT_ZTID%TYPE,
v_in_hmd IN icp_gn_temp_baxx_zt.in_hmd%TYPE,
v_czlb IN icp_gn_temp_baxx_zt.czlb%TYPE,
v_bajd IN icp_gn_temp_baxx_zt.bajd%TYPE
);
END NCS_ICP_TJ;
2.创建程序包包体，并在程序中创建存储过程实现

create or replace
PACKAGE BODY ncs_icp_tj AS
/*根据备案主体ID拷贝通过表备案数据到备案临时表，拷贝5张*/
PROCEDURE ICP_PASS_TO_TEMP(
v_main_id IN icp_gn_temp_baxx_zt.ztid%TYPE,
v_lyd IN icp_gn_temp_baxx_zt.SJXT_ZTID%TYPE,
v_in_hmd IN icp_gn_temp_baxx_zt.in_hmd%TYPE,
v_czlb IN icp_gn_temp_baxx_zt.czlb%TYPE,
v_bajd IN icp_gn_temp_baxx_zt.bajd%TYPE
)
IS
v_lsh integer;
BEGIN
select SEQ_ICP_GN_TEMP_BAXX_ZT_ZTID.NEXTVAL into v_lsh from dual;
IF v_main_id IS NULL OR v_lyd IS NULL OR v_in_hmd IS NULL OR v_czlb IS NULL OR v_bajd IS NULL THEN
RAISE_APPLICATION_ERROR(-20000, 'Exsit null value in arguments.');
END IF;
/*所有插入的查询条件为主体ID*/
/* 插入主体*/
INSERT INTO ICP_GN_TEMP_BAXX_ZT
(LSH, BBDW,ZTID, SJXT_ZTID, YHM_ID, IN_HMD, CZLB, SCBBSJ, ZJXGSJ, DWMC, DWXZ, TZZ, ZJLX, ZJHM, SHENGID,
SHIID, XIANID, XXDZ, ZJZS,JYLX, WZFZR, WZFZR_ZJLX, WZFZR_ZJHM, WZFZR_DHHM, WZFZR_SJHM,
WZFZR_DZYJ, WZFZR_MSN, WZFZR_QQ, BAXH, BAJD, ZSYXQ, SHR_XM,
SHSJ, BZ, LRYHLX, LR_YHM_ID, BAMM)
SELECT
v_lsh, BBDW, v_main_id, SJXT_ZTID, YHM_ID, v_in_hmd/*是否在黑名单*/, v_czlb/*操作类别*/, SCBBSJ, ZJXGSJ, DWMC, DWXZ, TZZ, ZJLX, ZJHM, SHENGID,
SHIID, XIANID, XXDZ, ZJZS, JYLX,WZFZR, WZFZR_ZJLX, WZFZR_ZJHM, WZFZR_DHHM, WZFZR_SJHM,
WZFZR_DZYJ, WZFZR_MSN, WZFZR_QQ, BAXH,v_bajd/*备案阶段*/, ZSYXQ, SHR_XM,
SHSJ,BZ, LRYHLX, LR_YHM_ID, BAMM
FROM ICP_GN_BAXX_ZT WHERE ID = v_main_id;
/*插入网站*/
INSERT INTO ICP_GN_TEMP_BAXX_WZ
(LSH,BBDW,WZID, ZTID, SJXT_WZID, SCBBSJ, XGSJ, WZMC, SYURL, WZFZR, WZFZR_ZJLX, WZFZR_ZJHM, WZFZR_DHHM, WZFZR_SJHM, WZFZR_DZYJ, WZFZR_MSN, WZFZR_QQ, NRLX, FWNR, BAXH, LRYHLX, LR_YHM_ID, BAMM, BZ,BAJD)
SELECT
v_lsh,BBDW,id, v_main_id, SJXT_WZID, SCBBSJ, XGSJ, WZMC, SYURL, WZFZR, WZFZR_ZJLX, WZFZR_ZJHM, WZFZR_DHHM, WZFZR_SJHM, WZFZR_DZYJ, WZFZR_MSN, WZFZR_QQ, NRLX, FWNR, BAXH, LRYHLX, LR_YHM_ID, BAMM, BZ,1
FROM ICP_GN_BAXX_WZ
WHERE ZTID = v_main_id;
/*插入接入*/
INSERT INTO ICP_GN_TEMP_BAXX_JR
(lsh, bbdw,JRID, ZTID, WZID, SJXT_JRID, SSISP, WZFB, WZJRFS, LRYHLX, LR_YHM_ID, BAMM, bajd)
SELECT
v_lsh, bbdw,ID, v_main_id, WZID, SJXT_JRID, SSISP, WZFB, WZJRFS, LRYHLX, LR_YHM_ID, BAMM,v_bajd
FROM ICP_GN_BAXX_JR
WHERE ZTID =v_main_id;
/*插入IP*/
INSERT INTO ICP_GN_TEMP_BAXX_IPLB
(lsh,bbdw,IPID, ZTID, WZID, JRID, SJXT_IPID, QSIP, ZZIP)
SELECT v_lsh, bbdw,ID, v_main_id, WZID, JRID, SJXT_IPID, QSIP, ZZIP
FROM ICP_GN_BAXX_IPLB
WHERE ZTID = v_main_id;

/*插入域名*/
INSERT INTO ICP_GN_TEMP_BAXX_YMLB
(lsh, bbdw,YMID, ZTID, WZID, SJXT_YMID, YM)
SELECT
v_lsh, bbdw,ID, v_main_id, WZID, SJXT_YMID, YM
FROM ICP_GN_BAXX_YMLB
WHERE ZTID = v_main_id;

END ICP_PASS_TO_TEMP;

END ncs_icp_tj;

3. 调用存储过程，call ncs_icp_tj.icp_pass_to_temp(5,1,0,2,17)

本存储过程的调用，实现了从5张通过表复制数据到5张临时表

二，触发器的创建。

1.行级触发器,没插入一条数据执行一次, 向临时表中加入数据时，执行此触发器，把临时表插入到临时表的数据复制的日志表中

create or replace
TRIGGER TRIGGER_ICP_TEMP_ZT_INSERT
AFTER INSERT ON ICP_GN_TEMP_BAXX_ZT
FOR EACH ROW
BEGIN
insert into ICP_GN_BAXX_XGLS_ZT
(ID,LSH, BBDW,LS_ID,ZTID,SJXT_ZTID, DWMC, DWXZ, TZZ, ZJLX, ZJHM, SHENGID,
SHIID, XIANID, XXDZ, ZJZS,JYLX, WZFZR, WZFZR_ZJLX, WZFZR_ZJHM, WZFZR_DHHM, WZFZR_SJHM,
WZFZR_DZYJ, WZFZR_MSN, WZFZR_QQ, BAXH, SHR_XM,
SHSJ, BZ, LRYHLX, LR_YHM_ID, BAMM)
values(　
SEQ_ICP_GN_BAXX_XGLS_ZT_ID.NEXTVAL,:new.LSH, :new.BBDW,:new.CZLB,:new.ZTID,:new.SJXT_ZTID, :new.DWMC, :new.DWXZ, :new.TZZ, :new.ZJLX, :new.ZJHM, :new.SHENGID,
:new.SHIID, :new.XIANID, :new.XXDZ, :new.ZJZS,:new.JYLX, :new.WZFZR, :new.WZFZR_ZJLX, :new.WZFZR_ZJHM, :new.WZFZR_DHHM, :new.WZFZR_SJHM,
:new.WZFZR_DZYJ, :new.WZFZR_MSN, :new.WZFZR_QQ, :new.BAXH, :new.SHR_XM,
:new.SHSJ, :new.BZ, :new.LRYHLX, :new.LR_YHM_ID, :new.BAMM);
END;


create or replace TRIGGER TRIGGER_ICP_TEMP_WZ_INSERT
AFTER INSERT ON ICP_GN_TEMP_BAXX_WZ
FOR EACH ROW
BEGIN
insert into ICP_GN_BAXX_XGLS_WZ
(ID,
LSH,BBDW,WZID, ZTID, SJXT_WZID, WZMC, SYURL,WZFZR, WZFZR_ZJLX, WZFZR_ZJHM, WZFZR_DHHM,
WZFZR_SJHM, WZFZR_DZYJ, WZFZR_MSN, WZFZR_QQ, NRLX, FWNR, BAXH, LRYHLX, LR_YHM_ID,BZ, ls_id)
values( SEQ_ICP_GN_BAXX_XGLS_WZ_ID.NEXTVAL,
:new.LSH,:new.BBDW,:new.WZID, :new.ZTID, :new.SJXT_WZID, :new.WZMC, :new.SYURL,:new.WZFZR, :new.WZFZR_ZJLX, :new.WZFZR_ZJHM, :new.WZFZR_DHHM,
:new.WZFZR_SJHM, :new.WZFZR_DZYJ, :new.WZFZR_MSN, :new.WZFZR_QQ, :new.NRLX, :new.FWNR, :new.BAXH, :new.LRYHLX, :new.LR_YHM_ID,:new.BZ,1);
END;


create or replace
TRIGGER TRIGGER_ICP_TEMP_JR_INSERT
AFTER INSERT ON ICP_GN_TEMP_BAXX_JR
FOR EACH ROW
BEGIN
insert into ICP_GN_BAXX_XGLS_JR
(ID,
lsh, bbdw,JRID, ZTID, WZID, SJXT_JRID, SSISP,
WZFB, WZJRFS, LRYHLX, LR_YHM_ID, ls_id
)
values (SEQ_ICP_GN_BAXX_XGLS_JR_ID.NEXTVAL,
:new.lsh, :new.bbdw,:new.JRID, :new.ZTID, :new.WZID, :new.SJXT_JRID, :new.SSISP,
:new.WZFB, :new.WZJRFS, :new.LRYHLX, :new.LR_YHM_ID,1);
END;


create or replace
TRIGGER TRIGGER_ICP_TEMP_IPLB_INSERT
AFTER INSERT ON ICP_GN_TEMP_BAXX_IPLB
FOR EACH ROW
BEGIN
insert into ICP_GN_BAXX_XGLS_IPLB
(ID,
lsh,bbdw,IPID, ZTID, WZID, JRID, SJXT_IPID, QSIP, ZZIP, ls_id
)
values( SEQ_ICP_GN_BAXX_XGLS_IPLB_ID.NEXTVAL,
:new.lsh,:new.bbdw,:new.IPID, :new.ZTID, :new.WZID, :new.JRID, :new.SJXT_IPID, :new.QSIP, :new.ZZIP,1);
END;

2.表级触发器 插入整个过程中，触发器只之行一次 ，当向AAA表中如入一条数据，将真个AAA表的数据复制BBB表

create or replace
TRIGGER TRIGGER_AAA_INSERT
AFTER INSERT ON AAA
BEGIN
insert into BBB(userid, username)
select id, username from AAA;
END;